| MRC |
Requirement Statement |
Characteristics |
| AATB |
WIDTH BETWEEN FLATS |
0.798 INCHES MINIMUM AND 0.812 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES THREADS |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| CQFM |
HARDNESS RATING |
80.0 ROCKWELL B MINIMUM OVERALL |
| AAJD |
THREAD CLASS |
2A |
| AHYM |
NOMINAL THREAD DIAMETER |
0.562 INCHES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
2 TYPE AND 10P STYLE |
| MATT |
MATERIAL |
STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL |
| CQHQ |
MINIMUM YIELD STRENGTH |
30000 POUNDS PER SQUARE INCH |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
FF-S-85 |
| CQBC |
MINIMUM TENSILE STRENGTH |
80000 POUNDS PER SQUARE INCH |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AASA |
THREAD LENGTH |
1.039 INCHES MINIMUM AND 1.250 INCHES MAXIMUM |
| SR-1 |
MANUFACTURERS CODE |
81348 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASU |
HEAD HEIGHT |
0.348 INCHES MINIMUM AND 0.371 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| AASB |
FASTENER LENGTH |
1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM |
