| MRC |
Requirement Statement |
Characteristics |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON FLATS |
| AAJD |
THREAD CLASS |
2A |
| AHYM |
NOMINAL THREAD DIAMETER |
0.750 INCHES |
| AASU |
HEAD HEIGHT |
0.455 INCHES MINIMUM AND 0.483 INCHES MAXIMUM |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE OVERALL |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MS51095-467 |
| CQFM |
HARDNESS RATING |
25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL |
| AAUB |
HOLE DIAMETER |
0.092 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
FF-S-85 |
| AASB |
FASTENER LENGTH |
3.406 INCHES MINIMUM AND 3.500 INCHES MAXIMUM |
| ASXK |
HOLE QUANTITY |
1 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD ALL MATERIAL RESPONSES OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| SR-1 |
MANUFACTURERS CODE |
81348 |
| CQBC |
MINIMUM TENSILE STRENGTH |
120000 POUNDS PER SQUARE INCH |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
HEXAGON |
| AATB |
WIDTH BETWEEN FLATS |
1.100 INCHES MINIMUM AND 1.125 INCHES MAXIMUM |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
2 TYPE AND 5 GRADE AND 10P STYLE |
| SR-1 |
MANUFACTURERS CODE |
96906 |
| MATT |
MATERIAL |
STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1527 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1536 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 OR STEEL COMP 1541 OVERALL |
| AASA |
THREAD LENGTH |
2.000 INCHES MINIMUM |
| BQDM |
HOLE TYPE |
DRILLED |
| CMLP |
THREAD QUANTITY PER INCH |
10 |
