| MRC |
Requirement Statement |
Characteristics |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON FLATS |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MS51096-358L |
| AAJD |
THREAD CLASS |
2A |
| AASA |
THREAD LENGTH |
0.698 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE OVERALL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.375 INCHES |
| CQFM |
HARDNESS RATING |
25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
FF-S-85 |
| AATB |
WIDTH BETWEEN FLATS |
0.551 INCHES MINIMUM AND 0.563 INCHES MAXIMUM |
| ASXK |
HOLE QUANTITY |
1 |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AASB |
FASTENER LENGTH |
0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SR-1 |
MANUFACTURERS CODE |
81348 |
| CQBC |
MINIMUM TENSILE STRENGTH |
120000 POUNDS PER SQUARE INCH |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
HEXAGON |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
2 TYPE AND 10P STYLE AND 5 GRADE |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
| SR-1 |
MANUFACTURERS CODE |
96906 |
| MATT |
MATERIAL |
STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1527 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1536 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 OR STEEL COMP 1541 OVERALL |
| AAUB |
HOLE DIAMETER |
0.060 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM |
| BQDM |
HOLE TYPE |
DRILLED |
