| MRC |
Requirement Statement |
Characteristics |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
0.850 INCHES MINIMUM AND 0.901 INCHES MAXIMUM FIRST HOLE |
| AAJD |
THREAD CLASS |
2A |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE OVERALL |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.074 INCHES MINIMUM AND 0.082 INCHES MAXIMUM FIRST HOLE |
| CQFM |
HARDNESS RATING |
25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL |
| AASU |
HEAD HEIGHT |
0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
FF-S-85 |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MS51105-308 |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SR-1 |
MANUFACTURERS CODE |
81348 |
| CQBC |
MINIMUM TENSILE STRENGTH |
120000 POUNDS PER SQUARE INCH |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
HEXAGON |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
2 TYPE AND 10P STYLE AND 5 GRADE |
| AASB |
FASTENER LENGTH |
0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| SR-1 |
MANUFACTURERS CODE |
96906 |
| AATB |
WIDTH BETWEEN FLATS |
0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| AHYM |
NOMINAL THREAD DIAMETER |
0.250 INCHES |
| MATT |
MATERIAL |
STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1527 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1536 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 OR STEEL COMP 1541 OVERALL |
| AASA |
THREAD LENGTH |
0.869 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
