| MRC |
Requirement Statement |
Characteristics |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON FLATS |
| AAJD |
THREAD CLASS |
2A |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
SAE ASSN STD ALL MATERIAL RESPONSES OVERALL |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
2 TYPE AND 10P STYLE OR 8 GRADE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| AASU |
HEAD HEIGHT |
0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
FF-S-85 |
| AAUB |
HOLE DIAMETER |
0.062 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| ASXK |
HOLE QUANTITY |
1 |
| AASA |
THREAD LENGTH |
0.406 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| SFTT |
SURFACE TREATMENT |
ZINC AND CHROMATE OVERALL |
| SR-1 |
MANUFACTURERS CODE |
81348 |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MS18154-4 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
HEXAGON |
| AASB |
FASTENER LENGTH |
0.531 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
| SR-1 |
MANUFACTURERS CODE |
96906 |
| AATB |
WIDTH BETWEEN FLATS |
0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| AHYM |
NOMINAL THREAD DIAMETER |
0.250 INCHES |
| MATT |
MATERIAL |
STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1527 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1536 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 OR STEEL COMP 1541 OVERALL |
| CQFM |
HARDNESS RATING |
32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
150000 POUNDS PER SQUARE INCH |
| BQDM |
HOLE TYPE |
DRILLED |
